EDI
Product Details:
| Place of Origin | Beijing, China (Mainland) |
|---|---|
| Brand Name | JZHK |
| Model Number | JZHK |
Payment & Shipping Terms:
| Packaging Details: | Export packing |
|---|---|
| Payment Terms: | L/C,T/T |
Detailed Product Description
EDIThe module and other brand module compare, have the following technical characteristic: (1) the thick shrinkage does not need the technical circulation, also does not increase the strong electrolyte, the operation is simple, easy to maintain. (2) the unique resin impregnation technology, causes the electric conduction resin proportion to increase, to gives the water quality fluctuation the adaptiveness to be stronger. (3) the module interior current of water realized mixed and the redistribution again, separated the efficiency to further enhance. (4) the thick header partition board has used the advanced hydromechanics design proposal, can promote the rapids and the density uniform distribution fully. (5) not high electric current regenerative process, under constant operating condition, system performance self-recovery.
EDI module operating guide module specification is complete, single module water yield scope from 0.5 m3/h to 5 m3/h. Several or dozens of module parallel arrangements may produce a nearly infinite scale system. Moves under the suitable operating condition, the module may produce the electronic resistivity to reach 15~18MΩ? cm pure water.
Table 1 series module current capacity scope
Table 2 Series module operational factor
|
Requests for the water The following is guarantees the EDI module normal operation the necessity lowest condition, to cause the systems operation result to be better, when system design should enhance suitably: For water and electricity conductance:
The RO pure water, the conductivity is generally 2~30 μs.
pH:6~9 (the best pH scope is 7~8, but, under this pH condition, for hardness of water cannot too high).
Temperature: 5~35.
Degree of hardness: (by the CaCO3 idea): ≤1.0 ppm, suggestion ≤0.1 ppm.
Silicon dioxide: ≤0.05 ppm.
Carbon dioxide (CO2): ≤5 the ppm,
CO2 content and the pH value will affect the product water electronic resistivity obviously.
Total organic carbon (TOC): ≤0.5 ppm, the suggestion value is zero.
Oxidant: Cl2≤0.05 ppm, O3≤0.02 ppm, the suggestion value is zero.
Appraises the metal (Fe, Mn): ≤0.01 ppm, the suggestion value is zero.
Enters the hydraulic pressure: ≤0.4 MPa, smallest is 0.15 MPa.
Water leakage pressure: The practical knowledge and the water outlet pressure must be lower than the product water extremely the outlet pressure
EDI
Company Info
Beijing Jiuzhou Forever Peace Environmental Equipment Limited
[China (Mainland)]
[Verified Member]
City: Beijing
Province/State: Beijing
Country/Region : China (Mainland)
Business Type:Manufacturer
Online Postings: Products




















